Lapse Rates

Lapse rates are progression at which air temperature changes with increasing / decreasing height in the atmosphere.  The rate is considered positive when temperature decreases with elevation, zero when temperature is constant with elevation, and negative when temperature is increasing with elevation.  While there are two different class of lapse rates, normal and adiabatic. The difference between normal and adiabatic lapse rates determine the vertical stability, or instability, of the atmosphere. That is, an air parcel’s tendency to embrace or prohibit vertical motion.

Environmental Lapse Rate—non-rising air that is affected by radiation, convection, and/or condensation. It averages about 6.5°C/km.

Dry Adiabatic Lapse Rate—rate of cooling with increasing altitude. It is constant at about 10°C/km.

Moist Adiabatic Lapse Rate—air, saturated with water vapor, is not constant but is determined by the combined effects of expansion cooling and latent heating (LH) because saturated air cools slower than dry due to the heating produced by condensing water vapor. Is always less than the dry adiabatic lapse rate.

Due to the fact that density differences are affected by the differences between the adiabatic lapse rates and the environmental lapse rate, one may notice that absolute instability occurs when the environmental lapse rate (Г_E) exceeds the dry adiabatic lapse rate (Г_D) [i.e. Г_E > Г_D]. Whereas, absolute stability occurs when the environmental lapse rate (Г_E) is less than the wet adiabatic lapse rate (Г_W) [i.e. Г_E < Г_W]. However, when the environmental lapse rate (Г_E) falls between the wet adiabatic lapse rate (Г_W) and the dry adiabatic lapse rate (Г_D) [i.e. Г_W < Г_E < Г_D] the atmosphere is considered conditionally unstable, as you can see from the picture below.

Lines on the Skew-T

Hypothetical Lapse Rates on a Skew-T Diagram